View STK628-130-E_4468330.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number : EN*A1404
Thick-Film Hybrid IC
STK628-130-E
Overview
Inverter for IH Cooker
Inverter Hybrid IC
The STK628-130-E is a inverter power hybrid IC for IH cooker containing power devices (IGBT and FRD), pre-driver, and temperature monitor.
Applications
* Inverter for IH cooker.
Features
* Built in integrates power devices (IGBT and FRD), pre-driver circuit. * Built in thermal protection. * The temperature monitor is enabled through the use of an internal thermistor. * A single power supply drive is enabled with using of internal bootstrap circuits for upper power supplies. * Direct input of control signal is possible. * SIP (the single in-line package).
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment.
20409HKIM No. A1404-1/6
STK628-130-E
Specifications
Absolute maximum ratings at Tc = 25C
Parameter Supply voltage Collector-emitter voltage Output current Output peak current Pre-driver supply voltage Symbol VCC VCE IO Iop VL VDD Input signal voltage Maximum loss Junction-to-substrate thermal resistance Junction temperature Storage temperature Operating temperature Tightening torque VIN Pd j-c(T) j-c(D) Tj Tstg TC MT H-IC case temperature A screw part *1 +-+, -, OUT terminal current +, -, OUT terminal current PW=100s, 1pulse VL - VSS VDD - VSS HIN, LIN ,SD terminal IGBT, Per 1 pcs IGBT, Per 1 pcs DIODE, Per 1 pcs IGBT, FRD junction temperature Conditions Ratings 400 600 60 90 0 to 18 0 to 18 -0.3 to VDD+0.3 135 0.9 1.9 150 -40 to +125 -20 to +100 1.0 Unit V V A A V V V W C/W C C C N*m
In the case without the instruction, the voltage standard is VSS terminal voltage. *1 Flatness of the heat-sink should be lower than 0.25mm. Electrical Characteristics at Tc=25C, VL, VDD=15V
Parameters Power output part Collector-to-emitter cut-off current Collector-to-emitter saturation voltage Diode forward voltage Control (Pre-driver) part Pre-drive power supply consumption electric current Input ON voltage Input OFF voltage Excessive temperature Temperature mounting resistance Monitor resistor B-constant Switching time VIH VIL TSD Rt B ton toff Output ON Output OFF The substrate surface TH-VSS value 25/50 C IO=50A, Inductive load 90 110 100 4250 0.7 0.7 110 9.5 6.0 ID VL, VDD=15V 0.7 2.0 mA V V C k k s ICE VCE (sat) VF VCE=600V IO=60A, Ch+, ChIO=-40A, Ch+, Ch1.8 1.6 150 2.5 2.2 A V V Symbols Conditions min typ max unit
In the case without the instruction, the voltage standard is VSS terminal voltage. Notes 1. Input ON voltage indicates a value to turn on output stage IGBT. Input OFF voltage indicates a value to turn off output stage IGBT. At the time of output ON, set the input signal voltage VIH (min.) to VDD (max.). At the time of output OFF, set the input signal voltage 0V to VIL (Max.). 2. When assembling the hybrid IC on the heat sink, tightening torque range is 0.8N*m to 1.0N*m. Flatness of the heat-sink should be lower than 0.25mm.
No. A1404-2/6
STK628-130-E
Package Dimensions
unit:mm (typ)
60.0
(24.0)
1 2.0 22 2.0=44.0
23 4.2 0.75 0.5 5.0
6.0
(50.0) 67.0
Internal Block Diagram
VB 6 1 VDD 19 2 3 VL LIN SD 20 7 21 Driver IC 22 23 13 VSS 18 Thermal sensor 14 15 12 NC 11 NC 4 NC 5 NC -VCC 9 10 HIN 8 OUT +VCC
16 TH1
17 TH2
21.8
3.6
(3.6)
13.1
26.2
No. A1404-3/6
STK628-130-E
Test Circuit
+shows the upper side and - shows the lower side. Fig.1 ICEO (IGBT/FRD) ICEO (IGBT/FRD)
CH+ M N 1 7 CH9 14
ICE M A
VCE
N
Fig.2 VCE(sat) (Test by the pulse)
CH+ M N m 1, 2, 3 7, 8, 9, 10 23 CH7, 8, 9, 10 13, 14, 15 21
M VB=15V 6 7 VDD=15V 19 18 m VL=15V 20 18 N V VCE (sat) IO
Fig.3 VF (Test by the pulse)
CH+ M N 1, 2, 3 7, 8, 9, 10 CH7, 8, 9, 10 13, 14, 15
M
V VF
IO
N
No. A1404-4/6
STK628-130-E
Fig.4 Switching time (example: ch1-)
1 2 3 7 8 9 CS Signal input 10 21 VL=15V 20 18 Iout ton 13 14 10% toff Input
VB=15V
6 7
VDD=15V
19 18
VCC
Iout 90%
Example of The Application Circuit
STK628-130-E
+VCC +VCC +VCC NC NC VB OUT OUT OUT NC -VCC -VCC -VCC TH1 TH2 VSS VDD VL OUT NC LIN SD HIN
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
VCC 0.68F 4.7F L (55H) 0.68F GND 0.047F 0.047F
1F
Thermal Sensor
Control Logic
+15V 10F GND
Recommended Operating Conditions
Parameters Supply voltage Pre-driver supply voltage Input ON voltage Input OFF voltage PWM frequency Tightening torque Symbol VCC VDD VIN (ON) VIN (OFF) fPWM MT `M3' Type Screw 0.8 20 +VCC - -VCC VDD - VSS *1 HIN, LIN, SD - VSS terminal 13 11 Conditions min typ 283 15 13 max 330 18 18 V 5 60 1.0 kHz N*m unit V V
Usage Precautions
1. This IC has a built-in thermistor between the TH terminal 1 (16pin) and TH terminal 2 (17pin). It allows monitoring of the board temperature using the divided voltage developed with the pull-up resistance RP. The resistance of the RP must be 10k or higher at a pull-up voltage of 5V and 39k or higher at a pull-up voltage of 15V.
No. A1404-5/6
STK628-130-E
100
-IF - VF
[FRD]
100
IC - VCE(sat)
15V
[IGBT]
Tc=25C
80
80
20V
60 60
-IF - A
40
25 10 C 0 C
IC - A
40
20
20
0 0.6
0 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2
ITF02656
0
0.5
1.0
1.5
10V
2.0 2.5
3.0
3.5
4.0
ITF02657
3.2 2.8 2.4
VCE(sat) - Tc
VF - V
[IGBT]
VGE=15V
VCE(sat) - V
IC=100A 80A 60A 40A 20A
VCE(sat) - V
2.0 1.6 1.2 0.8 0.4 0 10
20
30
40
50
60
70
80
90
100
110
ITF02658
Tc - C
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above.
This catalog provides information as of February, 2009. Specifications and information herein are subject to change without notice.
PS No. A1404-6/6

▲Up To Search▲

Price & Availability of STK628-130-E

	To Download STK628-130-E Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .